RM3 - A DUAL & QUAD CORE CORTEX A9

NEW - Blue Chip Technology are very happy to announce the latest addition to our highly successful Computer On Module ARM range. The RM3 is very powerful and feature rich System on Module (SOM).

The RM3 is the second product in this new range of processor modules which enable you to design the very latest technology products quickly and with very low risk (no pun intended). The RM3 is based on the latest ARM Cortex A9 processor from Freescale, the i.MX6. It is available in either Dual or Quad core versions with standard or extended temperature ranges. The performance of the RM3 is really a revelation, it is able to drive two independent high resolution graphics displays simultaneously. Power consumption is as you would expect from ARM technology, much lower than alternative approaches. Finally, all this in a module that is only 50mm by 50mm.

Our technical support team can supply a full design package for all of our RM boards to help you develop your host/carrier board as quickly as possible. They will also review your designs (again, no charge) to ensure that you have the best chance of getting your product to market right first time. Alternatively, if you would like Blue Chip Technology to design and manufacture your host/carrier board, just give us a call.

 

RM3 Top View
RM3 - ARM Dual & Quad Core Cortex A9 NEW RM3 - ARM Cortex A9 Dual and Quad Core 1GHz

  • Freescale i.MX6 ARM Cortex-A9 1GHz Dual/Quad Core Processor with TrustZone
  • Cortex A9 NEON™ MPE (Media Processing Engine) Co-Processor per Core
  • 32KB Instruction Cache + 32KB Data Cache per core
  • 1 MB unified I/D L2 cache, shared by two/four cores
  • 1GHz Processor Speeds
  • 512MB 64 bit DDR3 RAM
  • 1GB SLC NAND Flash
  • Dual HD displays (DVI/HDMI & LCD) supported simultaneously and independently
  • Total raw pixel rate of all interfaces up to 450Mpixels/sec, 24 bpp
  • One video camera/capture port - concurrent operation with dual video channels
  • USB 2.0 ports
  • 10/100/1000 Ethernet LAN
  • Power Management
  • Audio
  • General Purpose IO Lines
 
RM2 Top View
RM2 - ARM Cortex A8 800MHz & 1GHz RM2 - ARM Cortex A8 Single Core 800MHz & 1GHz

  • ARM Cortex A8
  • 800MHz or 1GHz Processor Speeds
  • Texas Insruments C64+ Digital Signal processor 600 or 800 MHz
  • Imagination Graphics 2D/3D Engine
  • 256MB Low Power DDR memory
  • 512MB SLC NAND Flash
  • USB 2.0 ports
  • 10/100 Ethernet LAN
  • 16 bit General Purpose Bus for Expansion
  • Power Management
  • Digital Camera
  • Audio
  • General Purpose IO Lines
 
HB3 Top Thumb
HB3 (Host Board 3) The reference platform for your RM2 or RM3 development. The HB3 provides a wide range of interfaces and functionality to support your software development whilst you design your electronics.

We offer a complete set of HB3 design information to customers, under NDA, to ensure that your development is as swift and risk free as possible.


  • Video - DVI, HDMI, LCD, 3 x Video Capture
  • Communications - Dual LANs, USBs, RS232, CAN, I2C, SIM socket, Zigbee
  • Storage - SATA, uSD, SD
  • Power - 7 to 12 volt DC input, Power Over Ethernet, Li-Ion battery, Battery charging/control
  • Miscellaneous - Mini PCI-e socket,Expansion Bus, GPIO, Analogue inputs, Analogue outputs
  • Full design package including schematics, gerbers, bill of materials and software.
  • Linux, Android and Windows Embedded Operating supported
  • Size - 170 x 170mm, Mini ITX compatible